Attic Insulation in Forest Hill, ON
Air sealing, blown-in top-ups, spray foam and insulation removal for Forest Hill homes, matched to how each house was built.

We insulate attics across Forest Hill, on the architect-designed streets and in the smaller houses of Upper Forest Hill. We're about 3 km away. The first thing we do is work out what your attic needs, and that is all we quote for.
Architect-designed Forest Hill homes
Forest Hill's building codes of the 1920s to 1930s required every home to be designed by an architect. For insulation, that rule tells you more than the street name does. Each house had its own plan, so one attic says very little about the one next door. We treat each roof space here as a separate job and look at it before we suggest a method.
Dormers and sloped ceilings
Dormers and rooms with sloped ceilings are often a good fit for spray foam. Closed-cell foam sticks to the underside of the roof deck and fills shallow rafter bays, where loose fill can't sit at full depth. The same pass seals the gaps around the dormer framing.
Open attic floors
If the space above your top-floor ceiling is open and you can get into it, blown-in cellulose or fibreglass is usually the simpler fix. The machine spreads loose fill evenly between and over the ceiling joists, and it can top up what's already there rather than replace it.
Upper Forest Hill houses from the 1940s and 1950s
The Upper Forest Hill homes to the north were built in the 1940s and 1950s, and they're smaller. A smaller house means a smaller attic, and in a small attic the gaps in the ceiling below let out a bigger share of the heat. Warm air rises through the openings around light fixtures, plumbing stacks, chimney chases and the attic hatch. Insulation alone won't stop it.
If the insulation already in your attic is in reasonable shape, do air sealing first and the top-up second. We pull the insulation back at each leak, seal it with spray foam or caulk, then blow new insulation across the whole floor to the depth the space needs. Doing it the other way round means digging through fresh insulation to find the gaps, and that wastes material and your money.
Insulation during a renovation
A lot of Forest Hill homes have been through a major renovation, or are in the middle of one. If yours is, deal with the attic while the ceilings are open or the roof is being worked on. Air sealing the top-floor ceiling is far easier from below with the drywall off. Wiring, pot lights and ducts can also go in before the insulation, instead of being pushed through it later.
Insulation that is wet, mouldy, matted or full of rodent droppings has to come out before anything new goes in, which is where attic insulation removal comes in. A high-powered vacuum pulls the loose material through a hose into bags outside and leaves the attic floor bare, so it can be sealed properly. If we find vermiculite, a pebbly grey-brown or gold fill, we stop and leave it alone. We'll recommend you have it tested by a qualified lab or abatement firm before any work goes ahead.
The city lists adding or replacing insulation as work that doesn't need a building permit, though zoning rules still apply. If other parts of your renovation do need a permit, we can plan the attic work around that schedule.
Nearby: Davisville, Roselawn and Summerhill
Forest Hill borders other neighbourhoods we work in, including Davisville, Roselawn and Summerhill. Each of those pages covers what's particular about the homes there. For all our services and the full list of areas, see our home page.
Local details for Forest Hill
- Postal codes: M5P
- Distance: About 3 km away in a straight line
- Permit rules: toronto.ca
- Nearby: Davisville, Roselawn, Summerhill
About Forest Hill: Forest Hill, ON on Wikipedia ยท Forest Hill on Google Maps
FAQ
Insulation questions from Forest Hill
During the renovation, once the top-floor wiring, ductwork and ceiling repairs are finished and before the ceilings are closed up. While the ceilings are still open, we can air seal from below. If we insulate before the other trades are done, they may squash or disturb the new insulation.
A Forest Hill attic with dormers usually gets spray foam in the dormer walls and sloped sections, and blown-in insulation on any open, flat attic floor. Spray foam fits the shallow rafter bays and seals the framing gaps around a dormer in one step. Houses built under the 1920s to 1930s rules were each designed by an architect, so dormers sit differently from house to house, and we check where they are before we quote.
Yes, a 1950s Upper Forest Hill house needs air sealing if the ceiling below the attic has gaps around fixtures, stacks, chimneys or the hatch. These houses are smaller, so each leak is a bigger share of the heat loss. We seal first and top up after, so the new insulation isn't sitting over open holes.
Next step
Request an insulation visit in Forest Hill
Call us, or send the form with your address and whatever you've noticed upstairs. We'll look at the attic, tell you which of the four outcomes fits, and put the work in a written quote.






